SunStar SPS/E-BS1202 Series User Manual page 26

6.9.3) Trimmer Shaft Position Setting
－ Loosen the tightening screw for the trimmer driving link and the tightening screw for the trimmer shaft collar.
－ Make the cross-section of the trimmer shaft touch the A section of the arm.
－ Fasten the tightening screw.
If the position is not properly set, the trimmer operation might be faulty or the parts might be stuck
with each other.
Caution
6.9.4) Link Stopper Position Setting
－ When the trimmer is not in operation, loosen the
tightening screw for the trimmer drive link stopper
and set the distance between the trimmer drive link
and the trimmer drive link stopper notch to be
0.3mm.
If the position is not properly set, the trimmer operation might be faulty or the parts might be stuck
with each other.
Caution
Trimmer Cam
Tightening Screw
Trimmer
Drive Link
Trimmer Shaft
0.3mm
Trimmer
Drive Link
0.3mm
Tightening Screw
Trimmer Drive Link Stopper
27