The Service Filter Screen - Hitron CGNM-2250 User Manual

7.3

The Service Filter Screen

Use this screen to configure service filtering. You can turn service filtering on or off
and configure new and existing service filtering rules.
Click Security > Service Filter. The following screen displays.
Figure 41: The Security: Service Filter Screen
The following table describes the labels in this screen.
Table 36: The Security: Service Filter Screen
Managed Services
Filter Enabled
Host Name
Protocol
99 99
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
Use this field to turn service filtering on or off.
Select Enabled to turn service filtering on.
Select Disabled to turn service filtering off.
This displays the name you assigned to the filtering rule
when you created it.
This field displays the protocol or protocols to which this
filtering rule applies:
Transmission Control Protocol (TCP)
User Datagram Protocol (UDP)
2012 Hitron Technologies
2014 Hitron Technologies
SECURITY