The Device Filter Screen - Hitron CGNM-2250 User Manual

Rule Status
Apply
Close
7.4

The Device Filter Screen

Use this screen to configure Media Access Control (MAC) address filtering on the
LAN, and to configure IP filtering.
You can set the CGNM-2250 to allow only certain devices to access the CGNM-2250
and the network, or to deny certain devices access.
You can turn filtering on or off, and configure new and existing filtering rules.
Click Security > Device Filter. The following screen displays.
104 104
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
Use this field to select whether the filtering rule should
be active or not.
Select Enabled to activate the rule. Matching traffic
will be blocked.
Select Disabled to deactivate the rule. Matching
traffic will not be blocked.
Click this to save your changes to the fields in this
screen.
Click this to return to the Service Filter screen without
saving your changes to the trust PC list.
2012 Hitron Technologies
2014 Hitron Technologies
SECURITY