The Gateway Function Screen; Table 17: The Basic: Gateway Function Screen - Hitron CGNM-2250 User Manual

Table 16: The Basic: LAN Setup Screen (continued)
Status
Renew
4.3

The Gateway Function Screen

Use this screen to configure gateway function. You can turn port triggering on or off
and configure new and existing port triggering rules.
Click Basic > Gateway Function. The following screen displays.
Figure 21: The Basic: Gateway Function Screen
The following table describes the labels in this screen.
Table 17: The Basic: Gateway Function Screen
Residential Gateway
Function
UPNP
Save Changes
Help
59 59
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
This displays Active when a device is connected.
Click this to obtain the connected device's information
again.
Use this field to turn gateway function on or off.
Select Enabled to turn gateway function on.
Select Disabled to turn gateway function off.
Use this field to turn UPNP on or off.
Select Enabled to turn UPNP on.
Select Disabled to turn UPNP off.
Click this to save your changes to the fields in this screen.
Click this to see information about the fields in this screen.
2012 Hitron Technologies
2014 Hitron Technologies
BASIC