Figure 43: Additional Service Filtering Options - Hitron CGNM-2250 User Manual

Table 37: The Security: Service Filter Add/Edit Screen
Port Range
Rule Status
Manage All Day
102 102
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
Use these fields to specify the start and end port for
which this filtering rule applies. These are the ports to
which traffic will be blocked.
Enter the start port number in the first field, and the end
port number in the second field.
To specify only a single port, enter its number in both
fields.
Use this field to select whether the filtering rule should
be active or not.
Select Enabled to activate the rule. Matching traffic
will be blocked.
Select Disabled to deactivate the rule. Matching
traffic will not be blocked.
Use this field to specify whether the filtering rule should
apply on all days of the week, at all times, or whether the
rule should be applied only at certain times.
Select YES to apply the rule at all times.
Select NO to apply the rule only at certain times.
Additional fields display, allowing you to specify the
times at which the rule should be applied.
Figure 43: Additional Service Filtering Options
Use the Managed Weekdays fields to specify the
days on which the rule should be applied. A red
background indicates that the rule will be applied
(traffic will be blocked), and a green background
indicates that the rule will not be applied (traffic will
not be blocked). Click a day to toggle the rule on or
off for the relevant day.
Use the Manage Time Start fields to specify the
period during which the rule should be applied.
Enter the start time in the From fields, using twenty-
four hour notation, and enter the end time in the To
fields.
2012 Hitron Technologies
2014 Hitron Technologies
SECURITY