Table 35: The Security: Firewall Screen - Hitron CGNM-2250 User Manual

The following table describes the labels in this screen.
Table 35: The Security: Firewall Screen
Firewall Level
(Security Level)
Save Changes
Cancel
Help
98 98
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
Select the level of firewall protection that you want to
apply to your LAN. Details about the protection level
display beneath the buttons.
These fields describe the specific protocols and
applications that are permitted or denied by the firewall
security level you select.
When you select Custom in the Firewall Level field,
additional fields display that allow you to toggle specific
features on or off:
Entire Firewall: select ON to enable firewall
security protection, or select OFF to disable it (not
recommended).
HTTP: use this field to Allow or Deny HyperText
Transfer Protocol traffic.
ICMP: use this field to Allow or Deny Internet
Control Message Protocol traffic.
Multicast: use this field to Allow or Deny multicast
traffic (sent to multiple devices at once).
P2P: use this field to Allow or Deny peer-to-peer
traffic (such as BitTorrent).
Ident: use this field to Allow or Deny Identification
protocol traffic. The Identification protocol allows
remote hosts to request identifying information
about users of a device.
Click this to save your changes to the fields in this
screen.
Click this to return the fields in this screen to their last-
saved values without saving your changes.
Click this to see information about the fields in this
screen.
2012 Hitron Technologies
2014 Hitron Technologies
SECURITY