The Ddns Screen - Hitron CGNM-2250 User Manual

The following table describes the labels in this screen.
Table 43: The Advanced > Switch Setup Screen
Port
Speed
Duplex
Enable
Save Changes
Cancel
8.2

The DDNS Screen

Use this screen to configure the CGNM-2250's Dynamic Domain Name System
(DDNS) settings.
Click Advanced > DDNS. The following screen displays.
113 113
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
This displays the number of each LAN port.
When no device is connected to the LAN port,
Unlinked displays.
When a device is connected to the LAN port, Linked
displays.
This displays the speed of the data link to the device
connected to the LAN port, in kilobits per second (kbps).
This displays the duplex status of the data link to the
device connected to the LAN port.
Use this to turn the LAN port on or off.
Click a disabled LAN port's On button to enable the
port. Data can be exchanged with the device
connected to this port.
Click an enabled LAN port's Off button to disable the
port. Data cannot be exchanged with the device
connected to this port.
Click this to save your changes to the settings in this
screen.
Click this to discard your changes to the settings in this
screen.
2012 Hitron Technologies
2014 Hitron Technologies
ADVANCED