Key Features; Hardware Connections - Hitron CGNM-2250 User Manual

1.1.1

Key Features

The CGNM-2250 provides:
High-performance DOCSIS 3.0 (24-channel downstream, 8-channel upstream)
Internet connection to cable modem service via the CATV port (F-type RF
connector) at speeds of up to 960 Mbps (megabits per second)
Full dual-stack IPv4/IPv6 support for routing and firewall (DSLite and 6RD)
Local Area Network connection via four 10/100/1000 Mbps Ethernet ports
Dynamic Host Configuration Protocol (DHCP) for devices on the LAN
LAN troubleshooting tools (Ping and Traceroute)
IEEE 802.11a/b/g/n/ac concurrent dual band (2.4GHz and 5GHz) wireless MIMO
(Multiple-In, Multiple-Out) networking, allowing speeds of up to
450Mbps+1300Mbps PHY data rate.
Wireless security: WEP, WPA-PSK and WPA2-PSK encryption, WiFi Protected
Setup (WPS) push-button and PIN configuration, MAC filtering,
Wired security: stateful inspection firewall with intrusion detection system, IP and
MAC filtering, port forwarding and port triggering, De-Militarized Zone (DMZ)
Settings backup and restore
Secure configuration interface, accessible by Web browser
1.2

Hardware Connections

This section describes the CGNM-2250's physical ports and buttons.
14 14
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
2012 Hitron Technologies
2014 Hitron Technologies
INTRODUCTION