Hitron CGNM-2250 User Manual page 85

Table 27: The Wireless: Access Control Screen (continued)
Type
Interface
Status
Action
Managed Devices
Block Rules
Host Name
MAC Address
Action
Save Changes
Add Managed Device
Help
85 85
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
This displays whether the device's IP address was
assigned by DHCP (DHCP-IP), or self-assigned.
This displays the name of the interface on which the
relevant device is connected.
This displays if the device filter is active or not.
Click Manage to make changes to the device's filtering
status; see Adding or Editing a Managed Device
page 86 for information on the screen that displays.
Use these buttons to control the action to be taken for
the devices listed:
Select Allow All to ignore the Devices list and let
all devices connect wirelessly to the CGNM-2250.
Select Allow to permit only devices you added to
the Devices list to access the CGNM-2250 and the
network wirelessly. All other devices are denied
access.
Select Deny to permit all devices except those you
added to the Devices list to access the CGNM-
2250 and the network wirelessly. The specified
devices are denied access.
This field displays the name of the wireless device.
This field displays the device's MAC (Media Access
Control) address.
Click Manage to make changes to the device's filtering
status; see Adding or Editing a Managed Device
page 86 for information on the screen that displays.
Click this to save your changes to the fields in this
screen.
Click this to add a new service filtering rule (see
Editing a Managed Device
Click this to see information about the fields in this
screen.
Adding or
on page 86
).
2012 Hitron Technologies
2014 Hitron Technologies
WIRELESS
on
on