Hitron CGNM-2250 User Manual page 80

Table 25: The Wireless: Basic Settings Screen (5G) (continued)
Wireless Mode
Channel Bandwidth
Wireless Channel
WPS Enabled
Multiple SSID Settings
Multiple SSID
Network Name (SSID) Enter the name that you want to use for this SSID. This
Enable
80 80
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
Select the type of 5GHz wireless network that you want
to use:
802.11n 5g: use IEEE 802.11n 5GHz.
NOTE: At the time of writing IEEE 802.11n is the only
5GHz network type available.
NOTE: Only wireless clients that support the network
protocol you select can connect to the wireless
network.
Select the 5GHz wireless channel bandwidth that you want
to use.
Select the 5GHz wireless channel that you want to use,
or select Auto to have the CGNM-2250 select the
optimum channel to use.
NOTE: Use the Auto setting unless you have a specific
reason to do otherwise.
Use this field to turn WiFi Protected Setup (WPS) on or
off on the 5GHz network.
Select ON to enable WPS.
Deselect OFF to disable WPS.
Click this to view settings for the main 5GHz SSID.
is the name that identifies your network, and to which
wireless clients connect.
NOTE: It is suggested that you change the SSID from
its default, for security reasons.
Use this field to enable or disable the SSID.
Select ON to enable the SSID.
Deselect OFF to disable the SSID.
2012 Hitron Technologies
2014 Hitron Technologies
WIRELESS