Adding Or Editing A Port Forwarding Rule - Hitron CGNM-2250 User Manual

Table 18: The Basic: Port Forwarding Screen (continued)
Protocol
Local IP Address
Remote IP Address
Status
Manage
Action
Add Rule
Save Changes
Help
4.4.1

Adding or Editing a Port Forwarding Rule

To add a new port forwarding rule, click Add Rule in the Basic > Port
Forwarding screen.
To edit an existing port forwarding rule, click Manage in the Basic > Port
Forwarding screen.
61 61
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
This field displays the protocol or protocols to which this
rule applies:
Transmission Control Protocol (TCP)

User Datagram Protocol (UDP)
Transmission Control Protocol and User Datagram
Protocol (TCP/UDP)
Generic Routing Encapsulation (GRE)
Encapsulating Security Protocol (ESP)
This displays the IP address of the computer on the LAN
to which traffic conforming to the rule's conditions is
forwarded.
This displays the IP address range on the WAN from
which traffic is forwarded (if configured).
Use this field to turn port forwarding rule on or off.
Use this field to Edit a port forwarding rule. Port
forwarding must first be set to Enabled. See
Editing a Port Forwarding Rule
information on the screen that displays.
Use this field to Delete a port forwarding rule. The
deleted rule's information cannot be retrieved.
Click this to define a new port forwarding rule. Port
forwarding must first be set to Enabled. See
Editing a Port Forwarding Rule
information on the screen that displays.
Click this to save your changes to the fields in this
screen.
Click this to see information about the fields in this
screen.
Adding or
on page 61 for
Adding or
on page 61 for
2012 Hitron Technologies
2014 Hitron Technologies
BASIC