Table 30: The Admin: Remote Management Screen; Figure 35: The Admin: Remote Management Screen - Hitron CGNM-2250 User Manual

Figure 35: The Admin: Remote Management Screen
The following table describes the labels in this screen.
Table 30: The Admin: Remote Management Screen
Remote Management
Protocol
ON/OFF
Port
Remote IP Range
Remote Range Allow
All
IP Start
IP End
Action
Save Changes
90 90
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
Use this field to enable/disable remote control protocols
and ports on CGNM.
HyperText Transfer Protocol (HTTP)

HyperText Transfer Protocol Secure (HTTPS)
Telnet
Use this field to enable/disable each protocol.
Use this field to specify which port to use with each
protocol.
This function allows you to grant access to a certain
range of IP addresses or all IP addresses.
Use this field to enter the start IP.
Use this field to enter the end IP.
Use this field to Delete a port forwarding rule. The deleted
rule's information cannot be retrieved.
Click this to save your changes to the fields in this
screen.
2012 Hitron Technologies
2014 Hitron Technologies
ADMIN