Hitron CGNM-2250 User Manual page 25

Press the RESET button on the CGNM-2250, and hold it in for 5 seconds or
longer.
Click Admin > Device Reset. In the screen that displays, click the Factory
Reset button.
After the operation, the CGNM-2250 turns off and on again, using its factory default
settings.
NOTE: Depending on your CGNM-2250's previous configuration, you may need to
re-configure your computer's IP settings; see
25 25
Version 1.0, 12/2014. Copyright
Version 1.0, 12/2014. Copyright
Hitron CGNM-2250 User's Guide
IP Address Setup
2012 Hitron Technologies
2014 Hitron Technologies
on page 21.
INTRODUCTION