Implement Limitations - Kubota L47TL Operator's Manual

Table of Contents

IMPLEMENT LIMITATIONS

The KUBOTA Tractor has been thoroughly tested for proper performance with implements sold or approved by KUBOTA.

Use with implements which are not sold or approved by KUBOTA and which exceed the maximum specifications listed

below, or which are otherwise unfit for use with the KUBOTA Tractor may result in malfunctions or failures of the tractor,

damage to other property and injury to the operator or others. [Any malfunctions or failures of the tractor resulting from use

with improper implements are not covered by the warranty.]

Tread (max. width) with industry tires

Front

4WD

L47

1165 mm (45.9 in.)

M62

1440 mm (56.7 in.)

Implement weight W

and / or size

L47

As in the following list

(Shown on the next page)

M62

Lower link end max, hydraulic lifting capacity..................................................................................................................W

Implement weight................................................................The implement's weight which can be put on the lower link: W

Max. drawbar load...........................................................................................................................................................W

Trailer loading weight.........................................................The max. loading weight for trailer (without trailer's weight): W

A Implement size may vary depending on soil operating conditions.

A Strictly follow the instructions outlined in the operator's manual of the mounted or trailed machinery or trailer, and do

not operate the combination tractor - machine or tractor - trailer unless all instructions have been followed.

A Forestry Application

Following hazards exist;

(a) toppling trees, primarily in case a rear-mounted tree grab-crane is mounted at the rear of the tractor;

(b) penetrating objects in the operator's enclosure, primarily in case a winch is mounted at the rear of the tractor.

Optional equipment such as OPS (Operator Protective Structure), FOPS (Falling Object Protective Structure), etc. to

deal with these hazards and other related hazards are not available for this tractor. Without such optional equipment

use is limited to tractor specific applications like transport and stationary work.

Rear