Checking Engine Start System - Kubota L47TL Operator's Manual

[L47 and M62]
(1) Lock plate
(2) Suspension adjuster
(3) Spring hook
(4) Reversible seat
[L47 and M62]
(1) Battery terminals
PERIODIC SERVICE OF THE TRACTOR
BChecking Engine Start System
To avoid personal injury or death:
A Do not allow anyone near the tractor while
testing.
A If the tractor does not pass the test, do not
operate the tractor.
C Preparation before testing.
1. Place all control levers in the "NEUTRAL" position.
2. Set the parking brake and stop the engine.
C Test: Switch for the speed control pedal.
1. Sit on the operator's seat.
2. Depress the speed control pedal to the desired
direction.
3. Disengage the PTO clutch control switch or lever.
4. Turn the key to "START" position.
5. The engine must not crank.
6. If it cranks, consult your local KUBOTA Dealer for this
service.
C Test: Switch for the PTO clutch control switch or
lever.
1. Sit on the operator's seat.
2. Engage the PTO clutch control switch or lever.
3. Place the speed control pedal in neutral position.
4. Turn the key to "START" position.
5. The engine must not crank.
6. If it cranks, consult your local KUBOTA Dealer for this
service.
C Test : Switch for the rear parking brake.
1. Sit on the operator's seat. (rear side)
2. Disengage the rear parking brake lever.
3. Turn the key to "START" position.
4. The engine must not crank.
(1) Speed control pedal
(2) PTO clutch control switch
(3) Hand brake lever
103