Adjusting Fan Belt Tension; Adjusting Brake Pedal - Kubota L47TL Operator's Manual

106 PERIODIC SERVICE OF THE TRACTOR
BAdjusting Fan Belt Tension
To avoid personal injury or death:
A Be sure to stop the engine before checking belt
tension.
A deflection of between 7 to 9 mm
Proper fen belt
(0.28 to 0.34 in.) when the belt is
tension
pressed in the middle of the span.
1. Stop the engine and remove the key.
2. Apply moderate thumb pressure to belt between
pulleys.
3. If tension is incorrect, loosen the alternator mounting
bolts and, using a lever placed between the alternator
and the engine block, pull the alternator out until the
deflection of the belt falls within acceptable limits.
4. Replace fan belt if it is damaged.
(1) Bolt (A) Check the belt tension
(B) To tighten
BAdjusting Brake Pedal
To avoid personal injury or death:
A Stop the engine and chock the wheels before
checking brake pedal.
15 to 20 mm (0.6 to 0.8 in.) on
the pedal.
Proper brake pedal
free travel
Keep the free travel in the right
and left brake pedals equal.
1. Release the parking brake.
2. Slightly depress the brake pedals and measure free
travel at top of pedal stroke.
3. If adjustment is needed, loosen the lock nut and turn
the turnbuckle to adjust the rod length within
acceptable limits.
4. Retighten the lock nut.
(1) Lock nut
(2) Turnbuckle
(A) Free travel