Every 50 Hours; Lubricating Grease Fittings - Kubota L47TL Operator's Manual

102 PERIODIC SERVICE OF THE TRACTOR

EVERY 50 HOURS

BLubricating Grease Fittings
Apply a small amount of multipurpose grease to the
following points every 50 hours:
If you operated the machine in extremely wet and muddy
conditions, lubricate grease fittings more often.
When applying grease to forward front axle support,
remove the breather plug and apply grease until grease
overflows from breather plug port.
After greasing reinstall the breather plug.
[L47]
(1) Grease fitting (Front axle support)
(2) Breather plug
(1) Grease fitting (Front axle gear case support) [RH, LH]
[M62]
(1) Grease fitting (Front axle support)
(1) Grease fitting (Front axle gear case support) [RH, LH]
[L47 and M62]
(1) Grease fitting (Top link) [if equipped]
(2) Grease fitting (Lifting rod RH) [if equipped]