Table of Contents
Advertisement
Connection
C-mount lens
Power supply
You can supply power to the camera module using the following methods.
Using the DIGITAL IF connector
As this unit adopts camera link PoCL standards, both the supplying power and camera control/image output are supported with
single or double camera link cable(s) using a camera link PoCL standard compatible camera link cable and image input board for
the camera.
Heat dissipation is required depending on the usage environment.
For heat dissipation, refer to When mounting the camera (see page 10).
Using the DC IN connector
You can supply power via the DC IN connector using the power adapter.
Use DC-700/700CE which is the stable power source free from ripple or noise.
Camera Link cable
Camera module
Camera cable
CCXC-12P02N
CCXC-12P05N
Tripod adaptor
CCXC-12P10N
VCT-333I
CCXC-12P25N
* If the camera module interface board for the camera supports PoCL, the
camera can be operated even if the items within the dashed line are not
connected.
Camera module interface board
Camera adaptor
DC-700/700CE
6
AC
TRIG
Internal signal
output
Advertisement
Table of Contents
