17-Point Interpolation; Arbitrary Setting; Save Lut; 3 × 3 Filter - Sony XCL-SG510C Technical Manual

17-point interpolation

Specify LUT using a 16 bit value on positions where 0 -
65535 is divided equally among 16.
Specify the input value using indexes 0 - 16. Specify a
16 bit value 0 - 65535 as the output value.
It is effective when the wide dynamic range is active.
Each time you set a parameter, 17-point interpolation is
applied immediately. So there is no build-command.
>LUT-FORMAT 5
>WIDE-LUT 0 0
>WIDE-LUT 1 4096
>WIDE-LUT 2 33300
>WIDE-LUT 3 39601
>WIDE-LUT 4 43826
>WIDE-LUT 5 47094
>WIDE-LUT 6 49796
>WIDE-LUT 7 52118
>WIDE-LUT 8 54166
>WIDE-LUT 9 56005
>WIDE-LUT 10 57678
>WIDE-LUT 11 59218
>WIDE-LUT 12 60646
>WIDE-LUT 13 61979
>WIDE-LUT 14 63232
>WIDE-LUT 15 64414
>WIDE-LUT 16 65535
65535
61440
57344
53248
49152
45056
Output
40960
36864
32768
28672
24576
20480
16384
12288
8192
4096
WIDE-LUT 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Arbitrary setting

The output values 0 through 4095 that correspond to
input values 0 through 4095 can be changed.
Command Parameter1
LUT 0 to 4095
Input
Parameter2
0 to 4095
Setting example:
>LUT 0 3
>LUT 1 10
>LUT 2 20
...
>LUT 4094 4000
>LUT 4095 4010
>LUT-FORMAT 3

Save LUT

When you change the settings, save them using the LUT-
SAVE command.
Command
LUT-SAVE
3 × 3 filter
A 3×3 area filter processing can be applied. The filter
processing with brightness of the central pixel and the
surrounding area, and the parameter of each pixel are
multiplied and added together. The result is the
brightness of the central pixel. Specify the coefficient in
the range of –8191 to 8191. 256 is regarded as ×1.
Depending on the parameter patterns, it can reduce
noise, adjust edge, and extract the outline.
Command Parameter
SP-FL 0
1
Command Parameter1 Parameter2
SP-FL-VAL 00
01
02
10
11
12
20
21
22
32
Setting
filter off
filter on
Setting
–
8191 to Parameter for the
8191 upper left pixel
–
8191 to Parameter for the
8191 upper pixel
–
8191 to Parameter for the
8191 upper right pixel
–
8191 to Parameter for the
8191 left pixel
–
8191 to Parameter for the
8191 central pixel
–
8191 to Parameter for the
8191 right pixel
–
8191 to Parameter for the
8191 lower left pixel
–
8191 to Parameter for the
8191 lower pixel
–
8191 to Parameter for the
8191 lower right pixel