Body Solid GWS100 Owner's Manual page 10

S T E P
2
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Wrench tighten ALL hardware at the end of STEP 2A . Nylon lock nuts will not fully screw
onto bolts, they must be wrench tightened to fully go on.
2A. Attach Front Post (E) to Right Frame (B) using:
1 - (#1) M10x75mm Hex Head Bolt
2 - (#3) M10 Flat Washer
1 - (#4) M10 Nylon Lock Nut
2B. Insert Rear Posts (D) into Left & Right Frames (B & C).
10