Slot Configuration; Table 2.1 Boards That Is Available To Mount In Slots - Samsung OfficeServ 7200 System Description

2.2.1 Slot Configuration

There are 6 slots that are available for mounting boards in each of the basic cabinet and
extension cabinet. The following table shows mountable boards for each slot of the cabinet.
Cabinet
Basic Cabinet
(OfficeServ Access)
Expansion Cabinet
(OfficeServ Expansion)

The WIM can be mounted only on slot 1 of the basic and expansion cabinets.

The TEPRIa can be only mounted on slots 3, 4 and 5 of the basic cabinet and Slot 3 of
the expansion cabinet.

The LIM, PLIM, PLIM2, GPLIMT, and GSIMT cannot be mounted on slot 1 of the
basic/expansion cabinet.

One GPLIMT can be mounted to each cabinet. When using an external rectifier, up to
2 boards can be mounted. Mounting and using the board above the restricted capacity
may overload and damage the PSU.

The OAS can be mounted on slots 1, 2, 3, 4, and 5 of the basic and expansion cabinet.
If the OAS is mounted on one of the slot 1 and 2, no board can be mounted on the
other slot. If any board is mounted on the other slot, the board will not work.
(If the slot 1 is occupied with the OAS, the slot 2 should be empty. And if the slot 2 is
occupied with the OAS, the slot 1 should be empty.)
© SAMSUNG Electronics Co., Ltd.

Table 2.1 Boards that is available to mount in slots

Slot
Slot 0 MP20 , MP20S
Slot 1 All boards except for MP20, MP20S, LCP, TEPRIa, LIM,
PLIM, PLIM2, GPLIMT, and GSIMT
Slot 2 All boards except for MP20, MP20S, LCP, TEPRIa and WIM
Slot 3, 4, 5 All boards except for MP20, MP20S, LCP, and WIM
Slot 0 LCP only
Slot 1 All boards except for MP20, MP20S, LCP, TEPRIa LIM,
PLIM, PLIM2, GPLIMT, and GSIMT
Slot 2 All boards except for MP20, MP20S, LCP, TEPRIa and WIM
Slot 3 All boards except for MP20, MP20S, LCP, and WIM
Slot 4, 5 All boards except for MP20, MP20S, LCP, TEPRIa and WIM
OfficeServ 7200 System Description
Mountable Boards
2-5