Figure 2.31 Front View Of The Mgi16; Table 2.34 Ports And Leds Of The Mgi16 - Samsung OfficeServ 7200 System Description

CHAPTER 2. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
Front View of MGI16 Board
The front view of the MGI16 is shown in the figure below:
LAN
The components on the front panel of the MGI16 have the functions below:
Ports, LEDs
LAN
SIO
RST
PWR LED
RUN LED
LAN Tx LED
LAN Rx LED
SVC LED
DSP LED
RTPT LED
RTPR LED
2-46
SIO

Figure 2.31 Front View of the MGI16

Table 2.34 Ports and LEDs of the MGI16

Port that connects the Ethernet.
UART port (for tests).
Button for resetting the MGI16.
This LED indicates the power supply status.
- Off: Power is not being supplied.
- On: Power is being supplied properly.
This LED indicates MGI16 board status.
- Off: Power is not being supplied.
- On: Booting.
- Blink: The RAM program is operating.
This LED indicates the status of the Ethernet data transmission.
- Off: Data does not exist.
- On or blink: Data is being transmitted.
This LED indicates the reception status of the link and Ethernet data.
- Off: Data does not exist or the link is not connected.
- On or blink: Data is being received.
This LED indicates if the service is being offered.
This LED blinks when the software task can be serviced.
This LED indicates if the VoIP DSP is operating.
This LED blinks when the VoIP DSP operates.
This LED indicates if the voice packets are being forwarded.
This LED turns on when the voice packets are forwarded.
This LED indicates if the voice packets are being received.
This LED turns on when the voice packets are received
LAN
PWR RUN
RST
SVC DSP RTPT RTPR
Functions
© SAMSUNG Electronics Co., Ltd.
LAN
Tx Rx
MGI16