Programming - Samsung OfficeServ 7200 System Description

1.3 Programming

There are three methods for programming in OfficeServ 7200. One is using the Man
Machine Communication (MMC) program, another is using the Installation Tool, and the
other is using Web Management. Using Web Management is only available for OfficeServ
7200 with MP20S.
The MMC program can change the data value used for the system operation program.
The MMC program is categorized into three levels, which are technician, operator, and
subscriber. Depending on the levels, some MMCs can be programmed by the subscribers
while some MMCs can not.
A password is required for the programming.
Technician-Level Programming
All programs can be programmed.
Programming can be made in any of the stations in the OfficeServ system, however in
some cases, programming can be only made in a station.
Operator-Level Programming
A technician can only program the programs specified in the „Program 802 Range
Specification of the Operator Program‟.
Programming can be made in any stations in the tenant group, however in some cases,
programming can be only made in a station.
Subscriber-Level Programming
Programming can be only made for the subscriber program.
Installation Tool
The Installation Tool is an application that provides various functions necessary for system
maintenance. The system maintenance software is installed on a PC for programming.
You can use the Installation Tool when you need to install a new system component or
change a system component or modify the database.
Web Management
The Web Management is an application that provides various functions necessary for
system maintenance. Because it has been embedded in system, you don‟t need to install.
You can use it when you need to install a new system component or change a system
component or modify the database.
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7200 System Description
1-9