Table 2.10 Ports And Leds Of The Tepria - Samsung OfficeServ 7200 System Description

Hide thumbs Also See for OfficeServ 7200:
Table of Contents

Advertisement

CHAPTER 2. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
The components on the front panel of the TEPRIa have the functions below:
Ports, LEDs
P1
LAN
SIO
RUN LED
SYN1 LED
LOS1 LED
AIS1 LED
L21 LED
TP1 LED
CLK LED
RST
2-16

Table 2.10 Ports and LEDs of the TEPRIa

Port 1 that connects the T1/E1/PRI cable
Port that connects the 10/100 BASE-T LAN (for tests)
UART Port (for tests), CPLD JTAG Port (for managements)
Green Light: When operating in E1/T1/PRI mode (blinks at a rate of 200 ms)
Orange Light: When operating in debug mode (blinks at a rate of 200 ms)
Indicates the status of the synchronization with the opposite switchboard.
- On: The frame synchronization with the opposite switchboard is incorrect
- Off: The frame synchronization with the opposite switchboard is correct
Indicates whether the opposite switchboard has a Loss of Signal (LOS).
- On: The opposite switchboard signal is small or suffers from a loss of signal
- Off: The opposite switchboard signal is received normally
Indicates whether the board received the alarm bit of the opposite switchboard.
- On: The board received the alarm bit of the opposite switchboard
- Off: The board did not receive the alarm bit of the opposite switchboard
Indicates the operation status of Layer 2.
- On: The Layer 2 is operating properly
- Off: The Layer 2 is operating abnormally
Indicates the type of the program running on Port 1
- On: The Port 1 is operating in PRI mode
- Off: The Port 1 is operating in T1/E1 mode
Turns on when the reference clock is used as the system clock.
Button for resetting the TEPRIa.
Functions
© SAMSUNG Electronics Co., Ltd.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents