Figure 2.34 Front View Of The Svmi-20E; Table 2.37 Ports And Leds Of The Svmi-20E - Samsung OfficeServ 7200 System Description

CHAPTER 2. Error! Use the Home tab to apply 제목 1,장 제목 1 to the text that you want to appear here.
Front View of SVMi-20E
The front view configuration of the SBC board, which is the main board of SVMi-20E is as
follows:
LAN
The components on the front panel of SVMi-20E are as follows:
Ports, LEDs
LAN
SIO
RST
VM1 LED
VM2 LED
VM3 LED
HDD LED
LAT LED
LRT LED
SDN LED
PGD LED
2-52
SIO

Figure 2.34 Front View of the SVMi-20E

Table 2.37 Ports and LEDs of the SVMi-20E

The LAN interface connector is used for data transmission and database
backup. It is also called as 'LAN connector' and mainly used for system file
transmission (backup and restore) SVMi-20E backs up or restores data by
using LAN provided by customer or by connecting to laptop computer or PC
connected the relevant LAN connector.
Used to connect to PC.
If pushing this button, SVMi-20E system starts and the call in progress is
disconnected.
When one or more ports are hooked on/off in the first 4 ports (1~4), it blinks.
When one or more ports are hooked on/off in the second 4 ports (5~8), it
blinks.
When one or more ports are hooked on/off in the final 4 ports (9~12), it blinks.
If accessing to the hard disk driver, LCD blinks.
When the LAN port is run, LED is turned on into green color.
When transmitting data to LAN, LED is turned on into orange color.
This LED displays the system status. When the system driver is loaded, LED is
turned on into red color, and if the loading is terminated, LED is turned into
green color.
If the system power is normal, LED is turned on into green color.
VM1 VM2 VM3 HDD
LAT LRT SDN PGD
RST
Functions
© SAMSUNG Electronics Co., Ltd.
SVMi-20E