Figure 2.25 Front View Of The Wim; Table 2.28 Ports And Leds Of The Wim - Samsung OfficeServ 7200 System Description

Front View of WIM
The front view of the WIM is shown in the figure below:
The components on the front panel of the WIM have the functions below:
Ports, LEDs
P1, P2, P3
P4
SIO
SERIAL
RUN LED
SERIAL LED
P1, P2, P3, P4
LED
RST
© SAMSUNG Electronics Co., Ltd.
P2 P3
P1 P4 SIO

Figure 2.25 Front View of the WIM

Table 2.28 Ports and LEDs of the WIM

The WAN/LAN interface port interconnected to the 10/100 BASE-T Ethernet
The WAN/LAN interface port interconnected to the 10 BASE-T Ethernet
UART port (for tests)
Port that connects the serial dedicated line that interworks with the V.35
This LED indicates the operation status of the WIM.
- Off: The WIM board is in an abnormal status or the power is not being supplied.
- On: The WIM board is operating properly.
This LED indicates the operation status of the LAN.
- Off: The link is not connected.
- On: The link is operating.
- Blinking: The Serial link is connected, and the data is being transmitted
This LED indicates the operation status of the DMZ.
- Off: The Ethernet is not connected.
- On: The Ethernet is operating.
- Blinking: The Ethernet link is connected, and the data is being transmitted
Button for resetting the WIM module
OfficeServ 7200 System Description
RUN
SERIAL
SERIAL P1
Functions
P2 P3
P4
RST
WIM
2-37