Figure 2.4 Front View Of The Mp20S; Table 2.8 Ports And Leds Of The Mp20S - Samsung OfficeServ 7200 System Description

Front View of MP20S
The front view of the MP20S main control part is as shown in the figure below.
The components on the front panel of the MP20S have the functions below:
Ports, LEDs
P1~4
MISC
LAN
SIO
Media Card
RUN LED
LAN LED
MC LED
RST
© SAMSUNG Electronics Co., Ltd.
P1 P2 MISC
P3 P4

Figure 2.4 Front View of the MP20S

Table 2.8 Ports and LEDs of the MP20S

Subscriber connection port of 4DLMI
Port to connect Ext PAGING, DRY CONTACT and Ext MOH
Port to connect 100 BASE-T LAN
Port connect to serial I/O for development tool
Port to insert an MMC+ card, which is a storage media
Status of Main CPU operation
- Off: No-power
- On (Green): On Booting
- Blink (Green): Normal Operation of Program
- Blink (Red): Fan module failed.
- Blink (orange): Reset button is pushed.
- ON (orange): Push the reset button over 7 sec, Flash Memory (Data base) clear
Status of LAN operation
- Off: Link and no-connection of LAN port
- On(Green): Link and LAN port connection
- Blink (Green): Tx/Rx Data through LAN port.
Status of MMC+ card operation
- Off: Non-mounted MMC card
- On (Green): Mounted MMC card
- Blink (Green): In Tx/Rx of MMC card
Button for resetting the MP20S board.
Button for Data base clear when pushed more than 7 sec
OfficeServ 7200 System Description
LAN
Media Card
SIO
Functions
RUN LAN
MC
LCP
RST
MP20S
2-13