Mtr2000 Station Functional Block Diagram (Sheet 1 Of 2); Unpacking Procedures - Floor-Mount Cabinets - Motorola MTR2000 Installation And Operation Manual

Installation
1.
Remove cardboard cover from station.
Top Packing
Spacer
Cut This
Band
Corrugated
Corner
Supports
2.
Cut band as shown.
3.
Remove top packing spacer and
corrugated corner supports.
14
Cardboard
Cover
Wooden
Skid
Figure 3.

Unpacking Procedures - Floor-mount Cabinets

4.
Remove antistatic bag. Do not discard bag,
it will be reinstalled to protect equipment
during installation.
5.
Depending on cabinet type, either open or
remove front and rear doors to gain access to
the four (4) bolts securing the station to the
wooden skid. Remove the bolts and nuts as
shown.
Wooden
Skid
6.
Use hoist to lift the station from the skid.
Remove skid and return station to floor.
7.
Replace antistatic bag over station to
provide protection during installation.
Antistatic Bag
Station
Cabinet
68P81096E37-N
06/28/05