Motorola MTR2000 Installation And Operation Manual page 72

CAUTION
CAUTION
RX Active
FS
68P81096E37-N
06/28/05
A major failure renders the station unusable. These failure could be
caused by one of the following conditions:
- Rx or Tx synthesizer out of lock
- PA failure,
- Sharp (i.e., 10dB) rf power cutback,
- self test failure
A random flashing of the Station Status LED indicates major failure of
!
the Station Control Module; since a control module reset turns the LEDs
on.
A minor failure limits the functionality of the station. These failures could
be caused by one of the following conditions:
- ac source power failure
- exciter or receiver analog metering voltage degradation
- wireline loopback failure
- invalid local channel selection
Boot mode is the mode the station is in during the loading of software into
the station's Flash memory.
Service mode is the mode the station is in during normal maintenance and
service periods. These modes include the following conditions:
- Intercom
- Access Disable
- Power Control Disable
The Radio Service Software (RSS) can be used to determine which failure
or service modes are active.
!
Service mode indicates that the station is not fully functional.
This RX Active LED indicates the following:
LED
LED Color
Green
This LED is lit when receive activation criteria (user defined) are satisfied;
i.e., the radio is unsquelched.
-
-
-
LED State
On Receiver is active.
Installation
PL Disable
Failsoft Disable
Service PTT
Indicates that the...
45