Service Connections - Motorola MTR2000 Installation And Operation Manual

Station Operation

Service Connections

Front of station
with Front Panel
removed.
4
Service ports and LEDs are located on the front of the Station Control
Module (SCM).
Figure 2 shows the position of the connectors on the SCM.
5/10MHz External
Reference Signal Speaker
Figure 2. SCM Connectors
The service ports include connectors for:
- 5/10 MHz External Reference Signal
- Service Speaker:
connects between the telephone connector on the Station Control
Module and an external speaker/amplifier (with a 6 pin molex con-
nector) via an adaptor cable; part number 0185180U01.
- RSS:
connects between the telephone connector on the Station Control
Module and the DB9 connector on a PC. A DB25 connector can also
be used to connect to the PC, when used with a DB25-DB9 adaptor.
- Service Microphone:
connects between the telephone connector on the Station Control
Module and a service microphone.
Service RSS Service
Microphone
68P81096E38-D
06/28/05