Handling - Riso comcolor gd series User Manual

Handling

WARNING
■ Do not place water containers or metallic
objects on the unit. If water drips inside the
unit or a metallic object drops inside it, a fire or
an electric shock might occur.
■ Do not remove the covers. Otherwise,
you might be electrically shocked by
the high-voltage part inside.
■ Do not disassemble or rebuild the unit by
yourself. Otherwise, a fire or an electric shock
might occur.
■ Do not insert or drop any metallic material or
flammable substances into the unit through
any opening. Otherwise, a fire or an electric
shock might occur.
■ When supplying or draining water, be careful
not to spill water into the interior of the unit.
Otherwise, a fire or an electric shock might
occur.
■ If something falls inside the unit,
immediately hold down the [Power] key
on the operation panel, turn off the
operating power, and then turn off the main
power switch. Next, unplug all of the power
cords and contact your dealer or authorized
service representative. Continued use might
result in a fire or an electric shock.
■ In the unlikely event that the unit
continues to be used while emitting
excessive heat, smoke, or a foul odor, a
fire or an electric shock might occur.
Immediately hold down the [Power] key on the
operation panel, turn off the operating power,
and then turn off the main power switch. Next,
be sure to unplug all of the power cords and
contact your dealer or authorized service
representative.
CAUTION
■ Do not insert your fingers or other objects into
the gap around the mail stacker.
Failure to do so may cause injury.
■ Be careful of protruding parts and metal
terminals when performing maintenance inside
the printer such as removing jammed paper.
Failure to do so may cause injury.
■ The inside of the printer may have areas with
ink. Be careful not to let the ink come in
contact with your hands or clothing.
Should ink accidentally make contact with your
hands, wash it off with detergent as soon as
possible.
■ When moving the unit, contact your dealer or
authorized service representative.
If you try to forcibly move the unit, the unit
might overturn, resulting in injury.
Wrapping Envelope Finisher User's Guide
Safety Precautions
7