Auto Power Off Timer
If there is no incoming source for a certain amount of time and you want to turn
power off automatically, use the
select between 1-60 seconds.
Standby Mode
Standby Mode
energy, or a "fast startup" mode that keeps the AC power supplies running. Each
option is described below.
Note:
allows you to choose between a low power setting, which saves
• Low Power - Powers off every component and board possible, which helps
conserve energy. In standby mode, the low power option only uses 0.5W of
power.
• Fast Startup - Keeps AC power supplies running and takes a little less time to
power up. If you intend to continually use networking capabilities, select this
option.
Fast Startup mode is
Planar UltraRes User Manual
Auto Power Off Timer
required
if you are using the network connection.
Auto Power Off Timer
slider on the Settings tab and
68