Installing Usb Drivers - Planar ultrares User Manual

Installing USB Drivers

When you install the UltraRes Control software, it will automatically install the
necessary USB drivers needed for communication between your computer and to
the UltraRes display. You only need to complete a few steps to finish the installation
process.
Once the installation is complete, click Close to close the program.
10
Plug one end of the USB cable into your computer and the other into the
1
UltraRes display.
Windows will detect the new hardware and attempt to install the drivers. If
2
this occurs, you should see a message similar to the following example.
If the USB driver installation is successful, you will see a message similar to the
3
example below. You are now done with the USB driver installation process.
Planar UltraRes User Manual
Installing USB Drivers
64