Important Information - Goodmans 4214 Instruction Manual

P D
LAYING
m
Press the CD/SKIP Button or CD direct access buttons to select the CD of your
choice.
m
Press the Play/Pause Button, disc play will begin from the start of the first track.
A particular track can be selected by turning the CD SKIP Control. If this is done
before pressing the Play/Pause Button, disc play will start with the selected track
when the Play/Pause Button is pressed.
m
At the end of the disc, playback will stop.
Notes: If the disc is deeply scratched, or too dirty, disc play may not start.
If an improperly centred disc is played, noise may be heard in the
mechanism. The use of such discs should be avoided.

IMPORTANT INFORMATION

This compact disc player has built-in error compensation circuits to correct for minor
defects in a disc. There are limits, however, to the amount of correction available.
In some cases, the CD player may skip some tracks on a disc during disc play. This
problem may be caused by defects (such as scratches) in the disc being played, which
are too large for the error compensation circuits to handle. If you encounter this problem,
play a new disc. If the CD player operates normally, the skipping problem is probably due
to a defective disc.
TO STOP A CD PART WAY THROUGH
m
Press the Stop Button. Disc playback will stop, the Play indicator will turn off, and the
display will show the total number of tracks and the total playing time of the CD.
m
To pause playback, press the Play/Pause Button. Disc play will pause at the current
play position and the display will flash.
m
To resume playback, press the Play/Pause Button again. The Play indicator will
be displayed.
T S
RACK
TO SKIP TO THE NEXT TRACK ON A DISC
m
For example, to skip ahead to the beginning of track 5 while track 4 is playing.
m
Twist the CD SKIP Control clockwise once. Disc playback will resume at the beginning of
track 5.
The CD player will skip ahead to the next track each time the CD SKIP Control knob is
twisted clockwise. Repeatedly twisting the CD SKIP Control makes the CD player
skip ahead through the disc track by track. Once the beginning of the last track is
reached the CD player will not advance any further.
ISCS
KIP
- 10 -