Advertisement
5. Software Installation
Before users use the I-7242D, they must configure the I-7242D by the DNS_MRU
Utility. Please do following steps to configure the I-7242D.
Step 1: Please install the DNS_MRU Utility. You can find this configuration tool from
our web site:
ftp://ftp.icpdas.com.tw/pub/cd/can_cd/devicenet/gateway/i-7242d/utility/
or the CD-ROM disk following the path of /CAN-CD/ DeviceNet/ Gateway/ I-7242D/
Utility/.
Step 2: Before you use the software, connect the I-7242D with your computer
correctly. Then turn off the I-7242D and connect the INIT* pin with the GND pin of the
I-7242D.
Step 3: Turn on the I-7242D. And execute the DNS_MRU Utlility.exe file. Thus the
startup figure would be displayed.
I-724D DNS/Modbus RTU Quick Start User Guide, July 2006, Version 1.1 ------ 4
Advertisement
