Enabling Smooth Mode - Agilent Technologies u1273a User Manual

Enabling smooth mode

U1273A/U1273AX User's Guide
Parameter Range
USER SCALE (0000.1 to 1000.0) V/V, A/V, or
(no unit/V)
To set the user scale conversion value and unit:
1 Press
for more than 1 second to enter the
Setup
multimeter's setup menu.
2 Browse to Menu 5 > USER SCALE, and press
value.
3 Use the arrow keys to change the user scale conversion
value and unit.
4 Press
to save your changes (or press
discard your changes).
5 Press and hold
Setup
to normal operation.
Smooth is used to smoothen the refresh rate of the readings
in order to reduce the impact of unexpected noise and to
help you achieve a stable reading.
The smooth refresh rate can be set from 0001 to 9999. The
smooth time is defined as the set value +1. Smooth will be
restarted when the variation count is exceeded, when the
range is changed, or after a multimeter function or feature is
enabled. The variation count is set to the value used for the
AutoHold feature (see
page 110).
You can enable Smooth by holding
the multimeter ("Power- on options"
method, however, is temporary and Smooth will be turned
off when you cycle the multimeter's power. You can
permanently enable Smooth from the setup menu.
Multimeter Setup Options
Setup Menu Items
until the multimeter restarts to return
"Changing the variation count"
on page 13). This
4
Default setting
1000.0 V(/V)
edit the
to
on
while turning on
123