Installing Ultra ATA Storage Driver for WinNT
The Ultra ATA Storage Driver must be installed in order
to use Windows NT operating system.
But it is needed only when your HDD, cable, and board
supports ATA100 spec..
1. Place the PCM-6896 CD-ROM into your CD-ROM drive.
2. Find the Ata folder in Driver folder, click on it.
3. Select Winnt4.0 folder.
4. Double click on the setup icon.
5. Click on Next.
6. Click on Yes.
7. Select the folder where you want to save the Ultra ATA driver.
8. Click on Next.
9. Click on Next.
Now the shut down computer for restart Window should be
visible. Please follow the command and the chipset driver has
be installed.
Chapter 4 Drivers Installation
85