Ir Connector (Cn10); Atx Power Connector (Cn11) - Aaeon PCM-6896 Manual

IR Connector (CN10)

The IrDA connector (CN10) can be configured to support wireless
infrared module, with this module and application software such as
laplink or Win95 Direct Cable connection, user can transfer files to
or from laptops, notebooks, PDA and printers. Install infrared
module onto IrDA connector and enable infrared function from
BIOS setup. Make sure to have correct orientation when you plug
onto IrDA connector CN10.
IrDA connector (CN10) pin definitions
Pin
1
2
3

ATX Power Connector (CN11)

For ease and reliability, a standard 20-pin ATX power supply con-
nector is onboard. Which also provide positive plugging through
it's guided and locking mechanism. Pin definitions as follows:
ATX Power Connector (CN11)
Pin
1
2
3
4
5
6
7
8
9
10
Signal
+5V
CIRTX
IRRX
Signal
+3.3V
+3.3V
GND
+5V
GND
+5V
GND
POWER OK
5VSB
+12V
Pin Signal
4 GND
5 IRTX
6 CIRRX
Pin Signal
11 +3.3V
12 -12V
13 GND
14 PS-ON
15 GND
16 GND
17 GND
18 -5V
19 +5V
20 +5V
Chapter 2 Installation 31