Table of Contents
Advertisement
Installing DRAM (DIMMs)
System Memory
PCM-6896 contains one socket for 168-pin dual in-line memory
module (DIMM). The socket uses 3.3 V unbuffered synchro-
nous DRAM (SDRAM). DIMM is available in capacities of 16,
32, 64, 128, 256, or 512 MB.
Supplementary information about DIMM
Your PCM-6896 can accept both regular and PC-100/133 SDRAM
Module(with or without parity).
Single-sided modules are typically 16 or 128MB; double-sided
modules are usually 32 or 256 MB.
Memory Installation Procedures
Installing the SDRAM is simple and may be performed quickly.
First, line up the card to the bracket. Making sure the teeth on
the card lines up to the bracket inserts. Hold the card at a 90
degree angle in your hand, push the card into the bracket. The
card will click into place, by itself. To remove the card push
outwards on the two handles on the sides of the bracket. The
card will eject by itself.
Chapter 2 Installation
15
Advertisement
Table of Contents
