Table of Contents
Advertisement
Exit Setup
Save & Exit Setup
Pressing <Enter> on this item asks for confirmation:
Save to CMOS and Exit (Y/N)?
Pressing "Y" stores the selections made in the menus in CMOS, a
special section of memory that stays on after you turn your system
off. The next time you boot your computer, the BIOS configures
your system according to the Setup selections stored in CMOS.
After saving the values the system is restarted again.
Exit Without Saving
Pressing <Enter> on this item asks for confirmation:
Quit Without Saving (Y/N)?
This allows you to exit Setup without storing in CMOS any change.
The previous selections remain in effect. This exits the Setup
utility and restarts your computer.
Chapter 3 BIOS setup
75
Advertisement
Table of Contents
