Storage And Disposal; Troubleshooting Problems - IKONNIK ET3 Owner's Manual & Technical Information

2.4ghz radio system
Table of Contents

Advertisement

Storage and Disposal

Storage
• Always store all equipment in a cool dry place when not in use.
• Always disconnect the batteries before storage.
• Never store the transmitter or receiver in direct sunlight for extended
periods of time.
• Never store the transmitter with batteries installed for extended periods
of time. Doing so may allow the batteries to leak and cause permanent
damage to the transmitter.
• Always disconnect electrical connections after use in wet environments.
Allowing the contacts to dry will reduce corrosion.
Disposal
Your product is considered electronic waste and should never be discarded
in standard garbage containers. Please visit your local hobby dealer (and
some home improvement centers) and use the FREE battery disposal center
for proper disposal/recycling. Consult your local city hall for information on
recycling other electronic waste.

Troubleshooting Problems

Before contacting customer support, recall that this is a hobby grade product
intended to be user serviceable. Please take the time to fully inspect your
product for any obvious causes to the issues you are experiencing. Below
are some of the most common issues experienced. Scan the QR code on the
front of the manual with your smart phone for quick access to the product
support content on our website.
• Many control issues can be resolved by simply re-pairing the transmitter
and receiver, always start here.
• Dead transmitter or vehicle batteries will cause the product to
malfunction and not work properly. As with TV remote controls in your
home, if the batteries are dead, they don't work. Start power related
troubleshooting with fresh batteries in the transmitter and recharged
batteries in the vehicle.
• Power connections between the Battery, ESC and receiver are critical to
the performance of the product. Running in various debris may cause
foreign objects to snag on wires, causing connections to come loose. It
is a good idea to unplug and reconnect motor and battery connections
when beginning power related troubleshooting. Also inspect for any
damage caused to the antenna.
Kr
Krypton
15

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents