Storage And Disposal; Troubleshooting Problems - IKONNIK ET4DS Owner's Manual & Technical Information

range and damage the antenna.
• Ensure the antenna is not being pinched by the set screw that holds the
antenna tube in place.

Storage and Disposal

Storage
• Always store all equipment in a cool dry place when not in use.
• Always disconnect the batteries before storage.
• Never store the battery, vehicle or transmitter in direct sunlight for extended
periods of time.
• Never store the transmitter with batteries installed for extended periods
of time. Doing so may allow the batteries to leak and cause permanent
damage to the transmitter.
Disposal
Your product is considered electronic waste and should never be discarded
in standard garbage containers. Please visit your local hobby dealer (and
some home improvement centers) and use the FREE battery disposal center
for proper disposal/recycling. Consult your local city hall for information on
recycling other electronic waste.

Troubleshooting Problems

Before contacting customer support, recall that this is a hobby grade product
intended to be user serviceable. Please take the time to fully inspect your
product for any obvious causes to the issues you are experiencing. Below are
some of the most common issues experienced. Scan the QR code to the right
with your smart phone for quick access to the product support content on our
website.
• Many control issues can be resolved by simply re-pairing the transmitter
and receiver, always start here.
• Dead transmitter or vehicle batteries will cause the product to malfunction
and not work properly. As with TV remote controls in your home, if the
batteries are dead, they don't work. Start power related troubleshooting
with fresh batteries in the transmitter and recharged batteries in the
vehicle.
• Power connections between the Battery, ESC and receiver are critical to
the performance of the product. Running in various debris may cause
foreign objects to snag on wires, causing connections to come loose. It is
a good idea to unplug and reconnect motor and battery connections when
beginning power related troubleshooting. Also inspect for any damage
caused to the antenna.
22