Notice; Precautions - IKONNIK ET3 Owner's Manual & Technical Information

Notice

Your IKONNIK product is calibrated, paired and tested at the factory prior
to final packaging, some issues may arise during shipping and handling
that can be easily resolved at home. For other adjustments it should be
known that hobby grade radio controlled products such as those offered by
IKONNIK differ from toy grade in that they are intended to be user-serviceable
products where the user can program and maintain their own product. We
try our best to ensure the information you need to introduce you to this form
of product ownership is available to you though this manual. Please see the
troubleshooting guide at the back of this manual for assistance in resolving
issues, either as they are experienced out of the box or as found after regular
use.
Note: Assuming your product functions properly as intended out of the box, the
best thing you can do is pay close attention to how it feels, sounds and functions.
This will help you identify problems later since you will have a reference of how the
product is supposed to perform.
If you require further information or assistance resolving a possible issue,
please consult the warranty card included with your product.

Precautions

WARNING: ALWAYS KEEP LOOSE CLOTHING, HAIR, TOOLS OR OTHER MOVABLE
OBJECTS AWAY FROM MOVING PARTS OF YOUR VEHICLE DURING SETUP AND
CONFIGURATION. SPINNING TIRES CAN EXPAND AND MAKE CONTACT WITH SMALL
TOOLS, OR HARDWARE AND SEND THEM FLYING AT HIGH SPEEDS RISKING
INJURY TO YOU OR OTHERS AROUND YOU.
• Your model can cause serious damage or injury so please use caution
and courtesy when operating your model.
• As a safety precaution, perform all transmitter (Tx) and receiver (Rx)
adjustments with all parts of the vehicle off the ground. This ensures the
complete control over the vehicle at all times during adjustments.
• Do not operate your model near traffic, bystanders, parking areas, or any
other area that could result in injury to people or damage to property.
• If at any time during the operation of your model you observe any erratic
or abnormal behavior of your model, immediately stop operation and
bring the mode to a safe stop in a safe location to diagnose the problem.
• Always power on your transmitter before turning your vehicle on.
• If you have little or no experience operating R/C models, we strongly
recommend you seek the assistance of your local hobby dealer.
• Do not expose the transmitter to water or excessive moisture.
• Do not operate radio controlled products in a lightning or thunder storm.
• Ensure your batteries (both Tx and vehicle) are charged before each use.
• Check all servos and electrical connections prior to each use.
4
2.4GHz Radio System