Introduction; System Specification - IKONNIK ET3 Owner's Manual & Technical Information

Kr
Krypton
R/C models are an extremely fun hobby, but safety should never be ignored
or taken lightly. Always take caution when operating your model as damage
to property and injury can result from careless operation. Please consult
your local hobby dealer with any questions or troubleshooting issues. And
of course don't forget to have fun, you deserve it after reading through all of
these safety tips!

Introduction

The IKONNIK ET3 is a user-friendly 2.4GHz radio system that offers three
channel operation - two proportional channels for steering and throttle and
a handy switched third channel to control auxiliary functions or accessories.
The transmitter fits the hand perfectly and with just four AA batteries it
weighs very little, making it comfortable for longer races. Perfect for the
newcomer and intermediate level drivers, the ET3 has many innovative
features such as an internal antenna and a charging jack (for upgrading
to rechargeable battery operation). As standard, it includes end point
adjustment on the throttle channel, a PPM output socket, steering dual rate
and digital trim, plus servo reverse on steering and throttle. The protocol
is IKONNIK Krypton, so it's compatible with all other Helion vehicles with
Krypton inside. Supplied with a 3-channel all-weather IKONNIK Krypton
receiver.

System Specification

Transmitter
Operating voltage: ................ 4.8 - 6.0V
Power supply: ....................... 4-cell alkaline / NiMH
Weight: .................................. 13.7oz (388g) with batteries
Frequency / modulation: ..... 2.4GHz / FHSS
Receiver
Operating voltage: ................ 4.8 - 6.0V
Weight: .................................. 12g
Dimensions: .......................... 34 x 26 x 16mm
5