Customizing The Central Data Station; Running The Customization Screen - VetScan i-STAT 1 Operator's Manual

3.

Customizing the Central Data Station

You can customize the following operational aspects of the CDS software:
■ Site Information
■ Serial Ports
■ Network
■ Interface
■ Options
■ Security

Running the Customization Screen

Access the Customization screen as follows:
1. Close the CDS application.
Click Start > Run..., type
2.
3. In the Customization screen, click the desired page's tab, and customize the information in each field
as needed. See the following pages for details on these fields.
4. Repeat for additional tabs as needed.
When finished, click Accept to save the information. Click Reset to disregard changes and restore
5.
the previous information. Click Cancel to ignore any changes and retain the current settings. When
customization is complete, the CDS application opens automatically.
For more information, see the following:
■ "Site Information" on page CDS-5
■ "Serial Ports" on page CDS-5
■ "Network" on page CDS-5
■ "Interface" on page CDS-5
■ "Options" on page CDS-6
■ "Security" on page CDS-7
CDS-4
Institution name and technical service phone number
Enables/Disables serial communications and allows individual ports to
be selected and configured.
Enables/Disables network communications and allows specification of
TCP port numbers.
Enables/Disables external interfacing and allows protocol to be
selected.
Allows various general system behaviors to be specified.
Enables/Disables the CDS Security features which allow for the cre-
ation of security profiles providing different levels of access to various
areas and functions of the CDS application.
at the prompt, then click OK.
wcds32 config
Central Data Station