Step 2 - Setting Up The Cds Database - VetScan i-STAT 1 Operator's Manual

Required Hardware
The i-STAT Central Data Station system requires the following hardware:
Part
Processor
Memory
Hard Drive
CD-RW Drive
Network Card
Standard Video Card
One or More USB Ports
One or More Serial Ports
Two Standard PS2 Ports
Standard Mouse
Standard Keyboard
Standard Monitor
Recommended Hardware
The following hardware is recommended in order to support the i-STAT CDS system:
Part
Modem
UPS
RAID Controller
Required Software
The following software is required in order to support the i-STAT CDS system:
Part
Remote Control Software
Virus Protection Software
File Compression Software
PDF Reader
Step 2 — Setting Up the CDS Database
1. Insert the CDS Database Setup disc.
Open My Computer, and go to the CD drive.
2.
3. Double-click SETUP.EXE to begin database setup.
When setup is complete, click Finish and remove the disc from the CD drive.
4.
CDS-2
Minimum Requirement
Pentium 4, 2.0 GHZ or faster
512MB or more
20GB or larger (RAID 1 recommended)
24X or faster
Standard 10/100/1000 Ethernet Network Interface Card
Resolution of 1024x768
RS232 ports are required for serial IR Link and Downloader connections. (If
not available, USB to RS232 adapters may be used.)
For IR Link connections only
Resolution of 1024x768
Recommendation
Standard 56k PCI internal modem (for remote support)
Uninterruptible Power Supply
RAID 1 (requires a second hard drive)
Requirement
Symantec pcAnywhere, Microsoft Remote Desktop, or equivalent
Norton or McAfee virus protection software
Standard ZIP compatible utility (i.e. WinZip, PkZip, etc.)
Adobe Reader Version 6.0 or higher
Central Data Station