VetScan i-STAT 1 Operator's Manual page 18

■ Operator list edit in progress: When editing the
operator list, check this box to delay updating the
VetScan i-STAT 1 until all editing is complete. When
editing is complete, click the box to remove the
checkmark. This box opens when Serial or Network Communications are enabled, Customiza-
tion is enabled, and Use Operator List is enabled.
■ Add Operator: This function is used to add new operators to
the list of operators. Alternatively, operator lists can be imported
(see Operator List Import at the end of this section). Click Open
Report > Add... from the menu or click the Add button in the
toolbar.
Enter the ID number that the operator will enter into the ana-
lyzer on the Operator ID line. If a different ID number is used to
access the LIS, this number should be recorded on the Alternate
ID line. An Operator Name of up to 40 characters can be
entered. A comment of up to 16 characters can be added. If
operators are to be certified for more than one method, such as
for the i-STAT cartridge and the PCx glucose test strip, certify
each operator for one method and use the Add Cert. toolbar button to certify all applicable oper-
ators at one time for the method. To add the first operator to a department, type the department
name (up to 10 characters). Once a department has been added, it can be selected for additional
operators from the drop-down list.
Check the Clear operator data when "Add and Remain Open" clicked box to specify
whether or not the operator information fields should be cleared when the Add and Remain
open button is clicked.
■ Delete Operator: Select the operator or operators. Click Operator > Delete... from the menu
or click Delete in the toolbar to delete the operator or operators. When the last operator from a
department is deleted, the department is removed from the system.
■ Move Operator: Select the operator or operators. Click Operator > Move... from the menu or
click Move in the toolbar and select a new department from the drop-down list. If the department
is not in the list, type in the new department name.
■ Find Operator: Click Operator > Find... from the menu or click Find in the toolbar, select the
method for which the operator is certified, and type in the operator ID. The found operator is
highlighted.
■ Edit Operator Data: Click the operator. Click Operator > Edit... from the menu or click Edit
in the toolbar. The operator ID, name, comment, and alternate ID can be edited.
■ Update Certifications: Select the operator or operators. Click Operator >
Update Certification... from the menu or click Update Cert. in the toolbar
and complete the Update Certification form.
CDS-14
Central Data Station