System; Help - VetScan i-STAT 1 Operator's Manual

Method Competence
This is a report of Quality Check Code occurrence for cartridges by Department, Operator, Location or
Analyzer.
Select a date range for the report. Select a Report by Depart-
ment, Location, Operator, or Analyzer, then select All Loca-
tions or All Departments or select one or more Locations or
Departments from the list. Click Display operator names if
desired. Select the filtering criteria for the report, then click OK.
When Quality Check Codes by Department is selected, opera-
tors are listed by Department.
A legend mapping individual code number to their respective
quality check code categories is available for viewing. To access
this legend:
1. Create the desired Quality Check Code report.
With the report still on the screen, click Report > View
2.
QC Codes by Category....

System

Customization: Central Data Station Settings
Configuration of the CDS can be viewed.
Customization: i-STAT Analyzer Settings
Customization profiles of the VetScan i-STAT 1 can be viewed.
AutoSend
When enabled, data will be transmitted automatically from the CDS to the LIS or other information man-
agement system when received by the CDS. If AutoSend is not enabled, results can be sent to a data man-
ager manually. Highlight the records to be sent in the appropriate Data Viewer Results viewer, then click
Record > Send Selected Records. If AutoSend is enabled, it will be checkmarked under the System
option on the menu bar. If an external interface is not enabled, AutoSend is shown in grey typeface.
Print Option
When Print is selected from the menu, a Printer Dialog box allows you
to choose from a list of installed printers, including any network print-
ers. To access this feature, do either of the following:
■ Click Main > Print.
■ Click Records > Print Selected Records.

Help

■ Technical Support: Phone number for your Abaxis Technical Support Representative.
■ About...: Software version of the Central Data Station.
Central Data Station
CDS-45