VetScan i-STAT 1 Operator's Manual page 33

Option Description
DECIMAL Comma (,) or period (.).
SEPARATOR
BASE EXCESS Base Excess of Extracellular Fluid
CALCULATION (BEecf), or Base Excess of Blood
(BEb).
Preference Window for Analyte Enable
Option Description
APPLY GLOBALLY Tests can be disabled for all cartridge
types. To enable/ disable a particular
analyte on all cartridge types, check/
uncheck the analyte name in the Apply
Globally section.
APPLY BY PANEL Tests can be disabled for individual
cartridge types. To enable/disable a
particular analyte on a specific
cartridge type, make sure the analyte is
checked under the Apply Globally
section. Next, click the cartridge type
under the Apply by Panel section, then
check/uncheck the analyte name.
Preference Window for Quality Control Options — Test Strip Lots
Option Description
TEST STRIP LOT Up to 5 test strip lot numbers of 14
NUMBERS characters each can be entered. Upper
and lower ranges for low, mid and high
controls for each test strip lot can be
entered.
TEST STRIP LOT Analyzer behavior when a scanned/
NOT ON LIST entered test strip lot is not on the test
ACTION strip lot list.
Options: Disable (allow test to
continue without warning), Warn
(prompt to continue), or Lockout
(disable testing until valid test strip lot
number is scanned/entered).
Default
Period
BEecf
Default
All tests enabled Global selection takes precedence
All tests enabled
for all cartridge
types.
Default
Blank
Disabled
Central Data Station
Comments
See Cartridge and Test
Information sheet for PCO
formulas.
Comments
over cartridge type selection.
Comments
Expired test strip lots must be
manually deleted on the expiration
date.
If no control values are entered,
the analyzer uses the control
values programmed into the test
strip lot number.
If the Customization program is
enabled (active), new lot numbers
are automatically added to the
analyzer's memory when it is
placed in a Downloader or
Downloader/Recharger.
CDS-29
for
2