VetScan i-STAT 1 Operator's Manual page 37

checked, its customization settings will not be changed even if it is selected. Note that Language and the
Unit Set from the default customization profile are always used.
Preferences for locations can also be changed by selecting an existing preference from the Apply Prefer-
ences submenu. Select the location or locations to be changed. Click Profile > Apply Preferences. Select
the desired preference and click Apply. Click View Preferences to review a set of preferences.
Making Selections
Select options in the following ways:
Select one of the seven main Customization options by double-clicking the box for Language, Unit
1.
Set, i-STAT Analyzer CLEW, i-STAT 1 Software, Preferences, or Chart Pages.
After making a selection in the Language, Unit Set and CLEW window, click OK to save the selec-
2.
tion, or click Cancel to return to the previous section.
Language Window
Use the Language Window to select the language used on the analyzer
Note: Russian is available only on the i-STAT Portable Clinical
Analyzer. Portuguese, Danish, and Finnish are available
only on the VetScan i-STAT 1.
Unit Set Window
Details of each unit set are displayed under the Analytes column.
Details are also listed in "Customizing the Analyzer" on page 3-6 the
VetScan i-STAT 1 Analyzer Operator's Manual.
To create a unique unit set, click UNITSET99, then the User Settings
tab. Then select the name and units for each analyte or test.
Central Data Station
CDS-33